Category
Subcategory
Manufacturer
Model
Condition
MST Rite Angle Attachment
External Coolant Port, Comes with Spanner Wrench Spindle Taper: CAT#50 | Rotating Direction: CCW/CW | Gear R...
2" Waldon KSC64-11C Roughing End Mill
C81 HS Waldon: KSC64-11C | Cutting diameter: 2" | Overall tool length: 9.75" | No. of flutes: 6 Flute
Misc. BT 40 Taper Collet/End mill Tool Holders
35 BT40 Collet/End Mill Tool Holders Gs bt40 341.75: 1 | Gs bt40 er16-5.00": 4 | Gs bt40 1/2-4.00": 1 | Comm...
Spabo 5.56" Face Mill
Equipped With: Made In Germany #50 Taper tool Holder Spabo: 118,304 | Big # 50 taper tool holder: CV50-SM1.5...
Valenite Boring Bar
Equipped With: Made In U.S.A. Kennametal Carbite Insert Valenite: BHP-NV-540-3 | Boring bar: 1" x 14"
Spabo 10" Face Mill
Equipped With: Made In Germany #50 Taper tool Holder Spabo: 118,304 | Big # 50 taper tool holder: ETM 50SM2....
2" SKF XP75C0 Roughing End Mill
Made In Sweden Skf: XP75C0 | No. of flutes: 6 Flutes | Cutting width: 2" | Overall length: 9.8"
2" Kestag 83 Roughing End Mill
Made In Austria Kestag: 100-604 | Cutting diameter: 2" M42 | Overall length: 9.3" | No. of flutes: 8 Flute
2" Waldon KAS64-11D Roughing End Mill
I80 HS Waldon: KAS64-11D | Cutting diameter: 2" | Overall tool length: 11.75 | No. of flutes: 6 Flutes
Nachi RG 3/4" End Mill
HS-Co8 Lead 4.078J Made In Japan Nachi: RG | Cutting diameter: 3/4" | Overall tool length: 4" | No. of flute...
C 5 Collets
11/64": 2 | 13/16": 1 | 1/2": 2 | 3/4": 1 | 35/64": 1 | 1-1/8": 1 | 11/32": 1 | 9/16": 1 | 7/16": 1 | 17/32...
ER DNA Collet Set
8 total collets: 3/32" - 7/64" - 9/64" - (2) 13/64" - 29/64" - (2) 15/32"
Nikken Slim Metric Collets
Sizes From SK 16mm to SK 3mm Nikken: Slim Chuck | Sk 16-16: 8 | Sk 16-15.5: 1 | Sk 16-15: 3 | Sk 16-14.5: 2
ER 20 Metric Collet Set
3-2 mm: 1 | 4-3 mm: 1 | 7-6 mm: 2 | 8-7 mm: 1 | 9-8 mm: 1 | 12-11 mm: 21 | 13-12 mm: 7 | 4 mm: 1 | 6 mm: 6
16" Gator Scroll Chuck W/Adaptor Plate
Equipped With: 16" A 11 Adaptor Modle # ADJS-400/16in.A11 Fully Machined Steel Body 37 lbs Gator ...
Hardinge 16 C Collets
Hardinge 16 C 13/32": 1 | 13/16": 1 | 3/8": 1 | 1-1/32": 1 | 1-3/16: 1 | 1-1/8": 1
8" Face Plate
Equipped With: Made In Poland Plate diameter: 8" | Bolt on type: 3 Bolt | Hole thru: 1" | T-slots: 6
